Dual Volts
 |
![CERAMIC HAIRSTYLING IRON DUAL VOLTAGE 110 220 Volts]](http://www.dizzyo.com/images/e/380287507966_0.jpg)
 VINTAGE WINDMERE CURLY TOP HAIR DRYER DIFFUSER MODEL HCT DUAL VOLT 1600 WATTS US $32.99 |
How Do I Install This? 18 inch kicker solox, Two Cadence amps (10000 watt total, 5000 RMS, 1 ohm at 13.8 volts?
How do I hook this up? How do I do the math? Can someone please help.
Specs on Amp;
4 Ohm RMS Power: 1 x 100 Watts @ 13.8 Volts
2 Ohm RMS Power: 1 x 1500 Watts @ 13.8 Volts
1 Ohm RMS Power: 1 x 2500 Watts @ 13.8 Volts
2 Amps Bridged: 1 x 5000 Watts
Frequency Response: 10Hz - 500Hz
S/N Ratio: >100 db
Damping Factor: >500 @ 100Hz
Minimum THD: <0.03%
Input Voltage: 200 mV - 6 Volts
Dimensions: 17" x 9.5" x 3.5"
Specs on sub:
* Sensitivity: 89.7 dB
* RMS Power Range : 5000 Watts
* Peak Power Handling: 10000 Watts
* Impedance: Dual 1 Ohm
* Low Frequency response: 18 Hz
* High Frequency Response: 100 Hz
* Diameter: 18 Inch
Somewhere in the documentation for your amps, there is a section on bridging the amps together. Follow that, and that will get you down to a single channel of speaker cable, i.e. both amps are mono (one channel) and have a + and a - output, giving you 2 + and 2 - outputs. What the bridging does is obviously, haha, add the output of one amp, to the other, and then to your woofer. Much like wiring things in series or parallel circuits.
Wiring your sub is also another thing you have to be careful of. You cannot just wire + to + and - to - , as this is a DVC (dual voice coil) sub.
Refer to the second diagram on this page for wiring your sub to a 2ohm load, which when your amps are bridged, can be handled, and is the optimum value. - http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=1&I=12
Make sure that your power and ground wires are nothing higher than 2 guage wire, that your ground connection is short length, and you will want to think about an extra battery, and definately a capacitor.
Anything else you need to know, shoot me an email, I can draw up a box design, a wiring diagram, you name it. I'm here to help. 
Series9 w/Dual Feed and PWM
Tags: 16plus16, de, electricpower, israel, mac
